Здравствуй, друг!
Еще не зарегистрировался?
Не пришло письмо
с активацией?
Запросить активацию.
Компьютерный форум NoWa.cc - Показать сообщение отдельно - MAC и WiFi сеть
Показать сообщение отдельно
Старый 15.03.2007, 08:47   #5
Регистрация: 03.01.2007
Адрес: мск
Сообщений: 53
Репутация: 14
По умолчанию Re: MAC и WiFi сеть

В нете есть инфа как принтер HP 1010/1018/1020 с помощью проги для UNIX отсюда: [Только зарегистрированные пользователи могут видеть ссылки. Зарегистрироваться...] можно прикрутить и к маку. Для линуксоидов более подробно расписано на их же сайтах в т.ч. и на русском. К сожалению я не понимаю что здесь буржуины написали и что такое sudo и где это написать надо:

1) Download, build and install the packages mentioned above.  See the install
   instructions for each package.

   NOTE #1: Installing software on OS X generally requires superuser privileges.
            If in doubt, always prefix commands mentioned in each software
            package's instructions with "sudo".

              eg: sudo ./configure --prefix=/usr
                  sudo make
                  sudo make install

   NOTE #2: When installing foomatic-filters, use the following command:

              sudo make install CUPS=/usr/libexec/cups \

            All on one line, of course.  This will install the foomatic-rip
            filter in correct place in Panther (10.3.x) and presumably in
            Jaguar (10.2.x) so that CUPS can find it.

2) Make sure CUPS is enabled by viewing "/etc/hostconfig" and looking for
   "CUPS=-YES-".  If you see "CUPS=-NO-", change it and restart your Mac.

   If CUPS is already enabled, type "sudo killall -HUP cupsd" in a terminal
   window to reinitialize CUPS and make the newly installed drivers available.

3) Now let's setup the printer.  However, you CANNOT use the "Printer Setup
   Utility" within OSX.  Unfortunately that utility does not allow you to
   specify the TCP port used to communicate with the printer.  Instead we
   have to use the CUPS web administration utility by going to:


   This is apparently the default way to access the CUPS administrator 'cause
   I didn't have to do anything to gain access to it.  If you are attempting
   to use the DB25-to-USB converter cable mentioned in the FOREWORD to hook the
   printer directly to your Mac, you may be able to use the "Printer Setup
   Utility" app; however, you can still use the CUPS web administration page

   a) Go to http://localhost:631
   b) Click on "Manage Printers"
   c) Click on "Add Printer"
   d) Fill in a Name, Location and/or Description with whatever you want.
   e) Select "AppSocket/HP JetDirect" from the list of devices.
   f) Enter "socket://<printerhostname>:35" as the Device URI, where
      <printerhostname> is the hostname or IP address of your printer and
      35 is the TCP port the 2200DL receives print jobs on.
      eg: socket://

      Note: There are some references between the 2200DL and port 9100 on the
            Internet.  This is a valid port for other Minolta printers, but
            NOT the 2200DL.

   g) Select the make of your printer.  This is "Minolta" for the 2200DL.
   h) Select the model of your printer.

HP LASERJET 1000/1005/1018/1020 NOTES
    You must send a firmware file to the printer each time you power it
    up.  If you downloaded the extra files for the HP above, a typical
    command line to load the firmware would be:

                lp /usr/share/foo2zjs/firmware/sihp1018.dl
                lp /usr/share/foo2zjs/firmware/sihp1020.dl

Now you should be able to use your printer.  Even though you can't use the
"Printer Setup Utility" to setup the printer, the printer will show up within
it.  You will still have to use the CUPS admin page to make any changes to your
printer configuration.

BTW, Apple, Mac, Jaguar, Panther, Xcode are probably trademarks of Apple
Computer, Inc. or their respective owners.  Minolta, Desklaser, magicolor, etc.
may be trademarks of Konika Minolta Printing Solutions U.S.A., Inc. or their
respective owners.  And other marks may be the intellectual property of their
respective owners.

Send any questions, suggestions and/or corrections to the email address above.
Remember, though, I may be slow to respond to some requests or may not be able
to respond to all.  However, I hope this document gives you enough information
to give you a jump-start.
, по этому наверное и не работает
vlslaw вне форума
Ответить с цитированием Вверх
Время генерации страницы 0.08267 секунды с 8 запросами